|
 |
Guaranteed protection against thread contamination from electrodeposited paints, primers, coatings and adhesion of weld spatter.
Nylok’s patented NYCOTE® coating process provides an affordable and efficient way of protecting fastener threads from weld spatter and electrodeposited paints, primers and coatings. NYCOTE is a non-conductive, 98%-pure Teflon® PFA Fluoropolymer powder thread coating that can be applied to virtually any fastener to add lubricity and reduce torque versus tension scatter.
Advantages
- Eliminates expensive masking, plugging or capping of threads
- Eliminates the need for "slave" bolts
- Eliminates re-tapping which can compromise quality and safety
- Prevents the adhesion of electrodeposited primers and coatings
- Prevents adhesion of weld spatter
- Reduces torque vs. tension scatter
- Improves lubricity and reduces installation drive friction
- Coats external or internal threaded fasteners
- Achieves known and repeatable clamp load
- Guarantees good electrical grounding
- Reduces manufacturing cost by increasing productivity
- Coats only the threads - not grip length or faces
- NYCOTE is patented and trademarked worldwide
NYCOTE is widely used in industries such as agricultural, automotive, appliance, electronics, HVAC, machinery, marine, outdoor power equipment, recreation equipment and telecommunications manufacturing.
RoHS / WEEE Compliance Sheet
Manufacturer Specifications:
|
company name |
specifications |
|
| |
|
| GM |
GM6076M |
|
| Ford |
WSS-M21P27 A1, A2 & A3 |
|
| Chrysler |
PS8542 |
|
|
INTERNATIONAL |
specifications |
|
| |
|
| Opel |
ON 2018 |
|
| Jaguar |
JFS: 02.01.13 |
|
| VW |
N 011 1954 |
|
| Mercedes-Benz |
MBN 10 392 |
|
| Nissan |
TO-925 |
|
| Land Rover |
RES.22.FP.04 |
|
|
